4000 SERIES STUDS
4000 Series Studs - (Camloc® compatible)
The stud assemblies consist of a stud blank, cup, spring and cross pin. These studs come complete as shown and are installed in the 4000 series grommets by using pliers part number MS-4P3 (see tools section). The cross pins should never be removed for installation as this ruins the integrity of the stud.
The Genuine MilSpec Difference: The heads of these studs are super tough, eliminating potential galling by the screwdriver ... even when overtorqed! Unique alloy(s) and machining methods produce a part that exceeds NASM5591 requirements for strength and durability while maintaining a weight savings of at least 10%. Every part is proudly made in the USA, in our facility, using the finest DFARS compliant, domestic raw materials and state of the art equipment.
Drawing & Specs
This drawing is for reference only. The chart below has the stud dash number in the far left column. This is the number that is stamped in the head of the stud. The two middle columns show the Total Material Thickness range (TMT) of each stud length when using Fixed depth or Adjustable depth receptacles. The far right column shows the S dimension for each dash number so you can easily measure and replace an existing stud. Dimensions are in inches. For metric conversion, use this formula: Inches x 25.4 = mm. mm ÷ 25.4 = Inches.
| Арт. | MPN | Описание | Цена | Add to cart form |
|---|---|---|---|---|
| 04-03517
|
MS4002-7
|
C-SPEC MS4002-7 STUD
|
$
3.50
|
|
| 04-03564
|
MS4002-8S
|
C-SPEC FASTENER MS4002-8S
|
$
3.95
|
|
| 04-03563
|
MS4002-4S
|
C-SPEC FASTENER MS4002-4S
|
$
5.35
|
|
| 04-03539
|
MS4002-13
|
C-SPEC MS4002-13 ZINC PLATED STUD
|
$
4.95
|
|
| 04-03515
|
MS4002-10
|
C-SPEC MS4002-10 FASTENER
|
$
3.55
|
|
| 04-03510
|
MS4002-4
|
4000 SERIES STUDS
|
$
3.35
|
Отзывы ещё не добавлены