CERTIFIED COATINGS SURE STRIP PAINT REMOVER

От 5 985 до 296 400
Арт. MPN Описание Цена Add to cart form
09-05710
CCP-S112-SG
CERT SURE STRIP GALLON
10 155
09-05701
CCP-S112-SQ
CERTIFIED COATINGS SURE STRIP PAINT REMOVER
5 985
09-03995
CCP-S112-55G
SURE STRIP PAINT REMOVER 55GL
296 400
09-05715
CCP-S112-5G
CERT SURE STRIP 5 GAL
43 725
Описание

Removes urethanes, epoxies, lacquers, primers, enamels, vinyls, varnishes, acrylics, shellac and polyesters. Washing off with water leaves a clean film-free surface that is ready for refinishing.

CERTIFIED COATINGS PRODUCTS, located in Los Angeles, has been manufacturing aircraft dopes, thinners and special products for the aircraft industry for 50 years. A small company making good quality, high-solids dopes, very competitively priced. Since their products are made locally, we enjoy a tremendous saving in delivery costs which is reflected in the pricing as well. We have handled their line for many years with complete customer satisfaction.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Can this stripper be used on fiberglass for removing paint?

It has not been tested on composite parts, so we can only recommend to use with caution.

Is the Certified Coating Sure Strip Paint Remover safe to use on aluminum wheels?

Yes, this product is safe to be used on aluminum wheels.

Will this Certified Coatings Sure Strip paint remover take away the cadmium plating under the paint also? Need to remove paint not the plating.

Per supplier: When you prep the metal scuffing and then applying acid etching primer or with alodine you compromise any plating on the metal whether it be cadmium, anodizing or alclad. Manufacturers apply the plating so that the metal does not rust or corrode before paint. Which is why if you are stripping any metal surface you want to paint or at a minimum prime the substrate immediately.

Can you use this Certified Coatings Sure Strip paint remover product on wood?

The answer is yes. The caveat is to not allow the stripper to soak into the wood. Once the paint or varnish is lifted, clean thoroughly. When finished, let the wood dry completely, sand and wipe down with a wet rag. Let dry and sand again. You don't want to leave stripper residue on the wood. If there is some he/she runs the risk of it reactivating and affecting the adhesion of the new coating.

Can this be used on PolyFiber coverings?

I cannot be used on fabric but it will removed poly fiber paints on metal, wood, or concrete.

Does Certified Coatings Sure Strip contain Methylene Chloride?

Yes it does.