RAC POS-12 POSITION SENSOR

14 070 ₽

Арт.

11-01321

Описание

Combined with a Ray Allen indicator, this sensor can be used to measure the position of wing flaps, cowl flaps, or many other mechanisms.Small enough to be installed anywhere, (note: T2 & T3 servos have their own built-in sensors) 1.2" travel.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What is the difference between the RAC POS-12 & POS-5 sensors?

The difference is the length of travel. The POS-12 is 1.2" travel. The POS-5 is 0.5" travel. If you unsure which one to use for your application, please verify with sales at 877-477-7823.

Could you tell me the energy comsumption of the POS-12 Position Sensor?

Per the manufacturer, the POS-12 does not consume any energy because as it is just a sensor. You would need to find the voltage of whatever device you have connected to this sensor.

Are these waterproof (for use on float wheels)?

No, this sensor must be protected from water in order to function.

Can the POS-12 be used with Dynon D120 to show trim position (on the D120)?

Yes, the D120 will interface with the POS-12 to show trim position.

Can the POS-12 be used with Dynon D120 to show trim position? Can the POS-12 be used with Dynon Skyview D1000 to show trim position?

Yes, both the D120 and D100 are able to display trim position from a sensor such as the POS-12.

What is the distance between the two fixing holes on this RAC POS-12 position sensor?

The distance between the 2 holes (center to center) is approximately 2-5/16".

What is the electrical connection for the three wires on the POS 12 My Dynon HDX only shows one wire going to the POS 12?

Orange wire: Connects to Orange wire of RP4 LED indicator.
Blue wire: Connects to Blue wire of RP4 LED indicator.
Green wire: Connects to Green wire of RP4 LED indicator.