C-SPEC 2700 MS27S3 STUD

От 1 005 ₽ до 1 305 ₽

Арт.	MPN	Описание	Цена
04-03536	MS27S3-13	C-SPEC MS27S3-13 CAD PLATED	1 305 ₽
04-03586	MS27S3-4	C-SPEC 2700 MS27S3 STUD	1 005 ₽
04-03508	MS27S3-2	C-SPEC MS27S3-2 FASTENER	1 170 ₽

Описание

C-Spec 2700 Series Stud (Camloc compatible)

These studs have a flush appearance when locked. The face diameter is 11/32 (.343") and the hole diameter for the panel would be 1/4" (.250") (requires dimpling or countersinking). You can avoid dimpling or countersinking the panel by using a 5/16" (.312") hole diameter which leaves only a slightly raised surface (.020").

Zinc Plated Steel Phillips Head MS27S3-13

Features

Drawing & Specs

This drawing is for reference only. The chart below has the stud dash number in the far left column. This is the number that is stamped in the head of the stud. The two middle columns show the Total Material Thickness range (TMT) of each stud length when using Fixed depth or Adjustable depth receptacles. The far right column shows the S dimension for each dash number so you can easily measure and replace an existing stud. Dimensions are in inches. For metric conversion, use this formula: Inches x 25.4 = mm. mm 25.4 = Inches.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Вопросы отсутствуют.