TINNERMAN U TYPE (NAS 395)

От 75 до 141
Арт. MPN Описание Цена Add to cart form
04-00362
54775-10
"U" TYPE TINNERMAN A1785-6Z-1D
108
04-00367
54780-10
U TYPE TINNERMAN A1348-8Z-1D
141
A1784-6Z-1D
07124-25
TINNERMAN U TYPE (NAS 395)
99
04-00366
54779-25
U TYPE TINNERMAN A1788-8Z-1D
78
04-00370
54783-10
U TYPE TINNERMAN A1758-10Z-1D
90
04-00365
54778-25
U TYPE TINNERMAN A1787-8Z-1D
93
A1787-10Z-1D
08915-25
"U" TYPE NAS395 (A1787-10Z-1)
105
04-00364
54777-25
U TYPE TINNERMAN A1789-8Z-1D
87
04-00368
54781-10
U TYPE TINNERMAN A1786-8Z-1D
75
Описание

Snaps over edge of panels or into center hole locations. Holds itself in place for blind assembly. "Floats" free for easy hole alignment.

Features

Specification Chart

Eligibilities

Instructions

HOW TO APPLY SPEED NUT FASTENERS

FLAT TYPE "U" TYPE
Fastener is positioned over screw clearance hole with screw-engaging prongs pointing up or outward. Screw is started into nut by hand from the underside.
Push into position with thumb until extrusion on lower leg snaps into screw hole. The fastener "floats" in screw-receiving position to correct for normal misalignment in panel mounting holes.

Screw can be power-driven into locked position (when base arch of fastener is flat) or a hand screw driver can be used. No wrench is required, finger pressure will prevent it from turning.

Place second panel in position and drive screw. Access to opposite side is unnecessary. Flush mounting can be made by embossing either panel.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
With reference to column G panel hole diameter measurement under spec tab. What exact dimension is that referencing? Regards, Nic

We have added a new specification chart both above the product listing and in the "Specification Chart" tab. It references each of the dimensions for clearly. G is a minimum diameter.

Sheet metal screws or machine screws? Ordered some, they do not accept machine screws, please clarify.

Tinnerman NAS395 nuts are used with sheet metal screws. Machine screws would require a Tinnerman LHA or Monadnack clip nuts. The screw size for machine screws will indicate the size, and thread count, 6-32, 8-32, etc.. Sheet metal screws are indicated by size and type, #6 type A, or #6 type B, etc..

What material are these NAS 395 tinnerman nuts made out of?

SAE 1065-1070 steel.