FLIGHT DATA SYSTEM FC-10 WITH FT-60 TRANSDUCER NON TSO

74 700 ₽

Описание

Flow: Instantaneous Display of Fuel Flow
Used: Fuel Used
Remaining: Fuel Remaining
Endurance: Time or Distance Remaining
Required: Fuel Required to Active GPS Waypoint
Reserve: Fuel or Time Remaining at Active GPS Waypoint
Efficiency: Miles Per Gallon (or Liter) Displays Fuel Flow and Fuel Used for Each Engine
(Two Engine Systems)
Size: 2-1/4" Panel Mount

This unit comes packaged with an EI FT-60 Flow Transducer. It is for use in aircraft with engine-driven fuel pumps and up to 350 HP. For Gravity fed systems, please view the "Alternate Items" tab for kits equipped with the FT-90 Flow Transducer.

Features

Not for certified aircraft
EI FT-60 Flow Transducer for use in aircraft with engine-driven fuel pumps and up to 350 HP
Single AND Twin Engine Compatible (With second Sender)
Communicates with Handheld or Panel Mount GPS
User Selectable Units (Gallons, Liters, Nautical Miles, Statute Miles)
Low Fuel Warning
Best Fuel Computer Value Available
Large Extreme Operating Temperature Display
Soft Orange Backlight with Automatic Brightness
Weighs 2.6oz
Size: 2-1/4" Panel Mount
12-28 Volt Compatible
Includes EI FT 60 (less than 350 HP - Fuel Pump)
Includes Pre-Wired Harness
Connector is pin to pin compatible with many JPI, Hoskins, and Shadin Systems

Documents

fc10manual.pdf

Арт.	MPN	Описание	Цена
10-03152		FLIGHT DATA FC-10 W/O SENDER	$ 249
10-03151	FC-10-TWIN	FLIGHT DATA FC-10 WITH FT-60 TWIN ENGINE NON TSO	$ 589
10-03150	FC-10	FLIGHT DATA SYSTEM FC-10 WITH FT-60 TRANSDUCER NON TSO	$ 397

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Can you hook the Flight Data FC-10 to a Garmin 296 or other Garmin portables for GPS input?

Yes, per the manufacture you can connect a Garmin portable to input GPS data to the FC-10. Just make you get the Garmin Power Data Cable for your Garmin portable which will allow you to wire it to the FC-10.

How long is the wiring provided for the sending unit on the FC-10.

Per the manufacture is it 6 feet.

What is the preferred sending unit for gravity fed systems for the FC-10?

The FC-10 comes with FT-60 transducer which is for fuel injected engines. If you have gravity fed aircraft please note that on the order so we can order a FT-90 for your application (same price).

What transducer is required on the Flight Data FC-10 for a low wing carbureted engine?

The Flight Data FC-10 comes with the FT-60 transducer which is used in aircraft with engine-driven fuel pumps & horsepower up to 350 HP.

Is the Flight Data Systems FC-10 2 1/4 or 3 1/8?

Per the manufacutrer, the FC-10 is 2-1/4" Standard Panel Mounted.

What is the size of this instrument? I intend to mount it in an existing hole in my panel and with limited space, this is something I need to know before ordering.

Per the manufacturer: the FC-10 fits in a 2 1/4" standard instrument hole.

Does the FT-60 transducer come with 1/4 NPT fittings or adapters for both ends? If not, what is a good part number that would work? Thanks.

They are not included. Please see part # 05-04454

Will this Flight Data Systems FC-10 work with fuel injection system that has a return line to the fuel tank? which would need a second sender to deduct the fuel back to the tank from the fuel used in the engine.

If your engine is equipped with a fuel return line from the carburetor back to the fuel tank you will need to install two flow transducers. One in the feed line from the fuel pump to the carburetor and one in the return line from the carburetor back to the fuel tank.

How does the FC-10 sense how much fuel is on board? Sensors? Key in #gallons? Is there a manual to read before buying?

Yes, this comes with a fuel transducer that calculates these measurements. You can find the manual on our documents tab.

Is the FC-10 FAA approved for Mooneys M20G or M20J?

No, this is a Non FAA Approved unit. We can only recommend it for experimental aircraft installation.

Can this gauge (FT-10) & transducer (FT-60) be used with the Rotax 582 engine?

Yes, this can be used on the Rotax 582.

Can this gauge (FC-10) & transducer (FT-60) be used with the Rotax 912S engine?

Yes, it will work for the 912 engines.