SPHERICAL FIREWALL FITTING - SS TTP 6100

17 925 ₽

Описание

The 6100 series firewall fitting is all steel and requires only one hole in the firewall. It has a ½ inch steel ball with a swivel angle up to 15 to 25 degrees from straight. It is held onto the firewall with one ¾ inch steel nut.

Assembly weighs only .7oz (.04lb).

Ball hole sizes available are .125, .188, .218, .240, .250 and .260.

Meets FAR 23.1191 and AC 20.135 requirements.

Order example: TTP-6100-125 (.125 ball hole size)

Арт.	MPN	Описание	Цена
05-06930	6100-188	SPHERICAL METAL GROMMETS BALL HOLE .188"	$ 59.75
05-06934	6100-260	SPHERICAL METAL GROMMETS BALL HOLE .260"	$ 59.75
05-06929	6100-125	SPHERICAL FIREWALL FITTING - SS TTP 6100	$ 59.75
05-06933	6100-250	SPHERICAL METAL GROMMETS BALL HOLE .250"	$ 59.75
05-06932	6100-240	SPHERICAL METAL GROMMETS BALL HOLE .240"	$ 59.75
05-06931	6100-218	SPHERICAL METAL GROMMETS BALL HOLE .218"	$ 59.75

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What size hole has to be drilled in the firewall to get the tachometer ferrule cap through to the tachometer? I will be using the .260 ball for the tach cable.

Drill a 5/8" for installation.

Is the ball split in to two halves? The picture shows a split on exposed end. That would allow for assembly point at main diameter of cable. My cables have fittings at the ends of a larger O.D.

Yes, the center ball the grips the outer housing of the cable is split in two pieces to allow cables with threaded ends to be used.

what size whole is drilled in firewall when using this clamp with a .125 cable?

Part # 05-06929 requires a .625 hole in the firewall.

Is the fitting aluminium or steel?

These are steel.