LORD ELASTOMERIC ENGINE MOUNTS - BEECHCRAFT

От 44 055 ₽ до 1 036 800 ₽

Арт.	MPN	Описание	Цена
07-01124	J-10520-1	LORD ELASTOMERIC ENGINE MOUNTS - BEECHCRAFT	64 185 ₽
08-00377	J-12453-12	LORD MOUNT J-12453-12	62 985 ₽
07-01139	J-6545-1	LORD ENG MOUNT # J-6545-1	44 055 ₽
08-00399	LM-427-SA7	LORD MOUNT LM427SA7	659 400 ₽
08-03706	J-10778-4	LORD ENGINE MOUNT J-10778-4	157 500 ₽
11-04206	J-3804-26	LORD ENGINE MOUNT J-3804-26	58 725 ₽
08-00398	J9613-50	LORD MOUNT J-9613-50	49 425 ₽
08-03705	J-10778-16	LORD ENGINE MOUNT J-10778-16	88 785 ₽
08-03709	J3804-10	LORD ENGINE MOUNT J-3804-10	78 585 ₽
08-00375	J9613-5	LORD MOUNT J-9613-5	104 700 ₽
08-00402	LM-427-SA12	LORD MOUNT LM-427-SA12	128 700 ₽
08-03704	J10778-14	LORD ENGINE MOUNT J-10778-14	165 900 ₽
08-03708	J-2245-1	LORD MOUNTS J-2245-1	45 525 ₽
07-01120	J-7518-2	LORD MOUNTS J-7518-2	56 625 ₽
08-00400	LM821SA49	LORD MOUNT LM821SA49	1 036 800 ₽

Описание

Note: Please review application guide below to confirm correct part number for your aircraft.

Lord Engine Mount Application Guide (PDF)

These compression type couplings consist of bonded rubber joints pressed into the sockets of metal hubs. These dynafocal engine suspensions provide proper flexible support to isolate engine vibrations and reduce noise transmission to airframe structure in all aircraft applications. Careful design assures maximum strength to hold the engine under ultimate load and emergency conditions. Suspensions also distribute loads in most desirable patterns, control engine motions, accommodate thermal expansion and manufacturers’ tolerances.

Documents

lordbrochure.pdf

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Do you sell the hardware used with Lord mounts?

Yes. We do carry the hardware you would need for these Lord Mounts. However, the specific part numbers you would need would depend on your aircraft application.

I have a Bonanza and need J-3804-26 mounts, do I need to purchase 4 or is this a set of 4?

P/N# 11-04206 would just be one engine mount. So, yes would need to purchase a quantity of four.

PN J-2245-1 // 08-03708, has this one the bushing sleeve inside?

It does not, it is only one half of the mount.

o-470-11 has 4 engine mounts how many J2245-1 i need to order, 4 or 8? this PN need the bushing sleeve inside?

You would need qty 8 for your engine. These do not have a bushing sleeve included.

Do these come with a Cert of Conformity from the Lord, or does the package display the necessary info? eg PN, SN, etc

Each package contains the following information: Part #, PO #, FAA/PMA, Cure Date, Batch #. Lord C of Cs can be furnished upon request at time of order.

Do these mounts come with the tabbed lock washer for safety wiring the mounting bolt?

The tabbed washer is not included with these isolators.