SANDIA STX 165 PANEL MOUNT MODE C TRANSPONDER FOR CERTIFIED AIRCRAFT

502 500 ₽

Арт.

11-09251

Описание

The STX 165 Sports a professional 1/2 3ATI Bezel that compliments any aircraft panel. Its bright OLED display is readable in virtually all lighting conditions and automatically dims for night time operations. Check out just a few of the STX 165 features.

Built-in Encoder
Simplifies installations and lowers cost.
Three Timer Functions
Elapsed Flight Time, Up Timer, Down Timer
Pressure Altitude Display
See what altitude your transponder is reporting to Center
Optional OAT Probe Input
Displays Outside Air Temp.,Density Altitude, Icing Alert
Small and Light Weight
7.4" behind the panel depth, 1.3 lbs.

Documents

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Does the Sandia STX 165 transponder need an external antenna?

Yes, an external transponder antenna is need. One is not included in the box so you can search for “transponder antennas” on our website to select one for your aircraft.

I have just purchased the Sandia STX 165 transponder. Is the adapter plate needed to mount the transponder or is there a mounting tray? I want to place the transponder under my instrument panel rather than in the panel.

The STX 165 does not come with mounting tray as it is small enough not to require a mounting tray for support. The adapter plate 11-10805 is to adapt the transponder into a 3-1/8" hole. It is intended to be mounted in the panel with or without the adapter otherwise you will have to make your own bracket for it.

Does the STX 165 work on 12 volt systems and what is the amp draw at 12 volts?

Per the manual, the STX 165 and STX 165R operate on 11-32Vdc. Power should be protected by a 1 amp fuse or circuit breaker.

Does the STX 165 without harness at least come with the required connectors and pins for installation?

Yes, the STX 165 does come with connector and pins for you or the avionics shop to wire.

For the Sandia STX165 Panel Mount Transponder, can the Outside Air Temperature sensor be added-on at a later time after delivery of the transponder?

Per the Manufacturer: Yes, you can. Directions for this are in the installation manual.

Does the SANDIA 165 have an Extended Squitter? Does it need an encoder? Which antennas can I use for it?

The Sandia 165 is a mode C transponder and does not have an Extended Squitter. It has a built in encoder. For an appropriate antenna you can search “transponder antennas” on our website to select one for your aircraft.

Can I use the STX 165 in a certified aircraft?

Yes, this unit is FAA TSO Approved for use in certified aircraft.

I have an existing OAT probe for my EIS, can I split off of those leads to this STX165 Transponder? In other words, if they are connected to each other will that cause a problem?

Per Sandia - The STX165 Transponder and the SAC 7-35 Airdata computer can only be interfaced with the Sandia STP 78 OAT probe, We have a different circuit value for Sandia units to measure.

With this Sandia STX 165 transponder, is there any addition equipment required to meet the FAA 2020 ADSB mandate?

No, this transponder cannot be used for the FAA 2020 ADSB mandate.

What does SANDIA STX 165 ADAPTER PLATE OPTION 3-1/8 INCH HOLE 11-10805 do exactly?

The adapter plate option allows you to install the Sandia STX165 in a standard instrument 3-1/8 hole in the panel.

Is the adapter plate painted or just bare metal?

The adapter plate comes black.

Is the Sandia STX 165 txpdr ADS-B capable? If so, what extra bits are required?

No, this is a Mode C transponder, and is not ADS-B capable.

What about mode s? is it included in this model?

No, this is a mode C transponder only.

Is the Sandia STX 165 compatible with the Uavionix Skybeacon/Tailbeacon ADSB Out units?

Yes, as the Skybeacon / Tailbeaocn units will work with both MODE C/MODE S transponders.

I fly a light sport trike. It does not have a transponder. Would the Sandia Stx 165 make my trike FAA compliant?

No, this is a Mode C transponder only, you will also need an ADS-B out unit for this to be compliant with the FAA.

Is coax extra or is it included with the Sandia STX 165?

Per the install manual it is not supplied.
Required items but not supplied are: