OPLITE 6 LED MAPLIGHT - 6 LEDS

От 22 836 до 29 925
Арт. MPN Описание Цена Add to cart form
13-06622
OP6-B12
SINGLE COLOR MAPLIGHT B1211
23 355
13-06630
OP6-W/G12
DUAL COLOR MAPLIGHT W/G1211
29 925
13-06627
OP6-G24
SINGLE COLOR MAPLIGHT G2411
23 985
13-06621
OP6-W12
SINGLE COLOR MAPLIGHT W1211
23 685
13-06629
OP6-W/B12
DUAL COLOR MAPLIGHT W/B1211
26 085
13-06626
OP6-B24
SINGLE COLOR MAPLIGHT B2411
23 355
13-06633
OP6-W/G24
DUAL COLOR MAPLIGHT W/G24
25 377
13-06620
OP6-R12
OPLITE 6 LED MAPLIGHT - 6 LEDS
23 355
13-06628
OP6-W/R12
DUAL COLOR MAPLIGHT W/R1211
26 085
13-06625
OP6-W24
SINGLE COLOR MAPLIGHT W2411
22 836
13-06632
OP6-W/B24
DUAL COLOR MAPLIGHT W/B24
26 085
13-06623
OP6-G12
SINGLE COLOR MAPLIGHT G1211
23 355
13-06624
OP6-R24
SINGLE COLOR MAPLIGHT R2411
23 355
13-06631
OP6-W/R24
DUAL COLOR MAPLIGHT W/R24
25 377
Описание
Multi-Color Aircraft LED Maplighting.

For Experimental, Amateur-Built aircraft only.

 

The body of the maplight is constructed of aircraft grade 6061 T6 aluminum and black anodize treated for protection from corrosion. The LED bulbs and internal components are high quality components, and are engineered to withstand 150% of their rated voltage without damage. The wire is tefzel coated mil-spec wire used in certified aircraft and the component potting material is a two part epoxy making this maplight highly vibration and shock resistant. The average bulb life of the LED used in this product in excess of 20,000 hours of use and the maplight draws only 20 milliamps of power with virtually no heat produced. The Maplight 6 series is available either with all six LEDs of your color choice operating simultaneously, or three white LEDs and three LEDs of your color choice operating independently of the other color. The Maplight 6 series is compatible with all dimming systems.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Is this item dimmable?

Per the supplier: Yes, these LED Maplights are dimmable.

Which are the dual colors available?

These lights are available in White/Red, White/Blue, and White/Green. You can select them from the "Color" dropdown list above.

Will this give a 360 swivel? Where is the switch located to change lights from white to red?

No, the maplight does not swivel and is intended for stationary installation. The switch is located on the side of the light.

I purchased 2 of the Oplite LED Maplight II - 6 LEDs back in February of 2013 and am getting to the point of wiring them in my RV10. Unfortunately, I am unable to locate the wiring instructions for them. Would you have a copy of the wiring instructions available? I dont want to mis-wire them and cause any damage. Thank you.

We have added the Installation and Specifications PDFs to the 'Documents' tab of the webpage. Please download and review them there.

Is there a on-off switch as well as color light selector switch? Or is the light strictly panel powered?

There are no switches provided with the light. Per the manufacturer - you must also choose the proper switch for the aircraft. The switch part numbers are listed in the applicable aircraft parts manual. There is a difference in the switches as the single colored light assemblies use a single pole, single throw switch. The dual colored light assemblies use a single pole double throw switch with a center off position. The factory switch assemblies must be used unless an approved alternate switch is obtained.

Do you sell the light switch and dimmer assembly?

Since this is a single color light, this would need a single pole single throw switch of your choice. As for the dimmer, something like 11-06674 would work for an experimental aircraft.

Oplite says this can be used in certified aircraft. Your information for lamp is indicating for experimental built only. Youre listed on their website as an authorized dealer. What is the correct information?

This particular Oplite is not certified, however we do offer versions that are. Part number 11-13860 for example.