WEST SYSTEM 209-SA EXTRA SLOW HARDENER - 1 PINT

11 550
Арт.
01-00362
Описание

WEST SYSTEM brand resins and hardeners, form a two-part epoxy system developed by Gougeon Brothers specifically for wood and composite construction. WEST SYSTEM epoxy is recommended by Rutan Aircraft Factory for certain homebuilt aircraft applications, particularly where a moisture resistant epoxy is desired. 105 Resin is the base material on which all of the WEST SYSTEM epoxy systems are built. The resin is a clear, light amber, low-viscosity liquid. It is designed specifically to wet out wood fiber. With roller applications, it possesses excellent thin film characteristics in flowing out and is self-leveling without fish-eyeing. Its relatively high flash point makes it safer to work with than polyesters. It can be cured in a wide temperature range, then sanded and shaped. It cures quite clear so that the natural finish shines through.

205 Fast Hardener, when mixed with the 105 Resin in a ratio of 5 parts Resin to 1 part Hardener, yields a high-strength, rigid solid with excellent cohesive properties and provides an excellent moisture vapor barrier. The 105 Resin/205 Fast Hardener has a pot life of 10-15 minutes at 70°F. It is also recommended in coating applications where natural finishing is desired. Partial cure time at 70°F is 5-7 hours. 206 Slow Hardener is a low-viscosity mixture of polyamines. The 105 Resin/206 Slow Hardener has a pot life of 30-40 minutes at 70°F. It is normally used when extended time is needed for large coating and bonding applications. It is especially well suited to working in warmer climates. Partial cure time is 9 hours at 70°F. Order by size and hardener. Pump sold separately.

Features
Choose the right hardener to control the cure time of 105. Epoxy Resin at the temperature at which you will work.

  • Select your hardener to give you the pot life you want at the temperature and conditions in which you will work. #205 Fast Hardener, mixed at a 5:1 ratio with #105 Resin, results in a pot life of 9-12 minutes at 72°F, with solid cure in 6-8 hours. It has a minimum recommended working temperature of 40°F. #206 Slow Hardener, mixed at the standard 5:1 ratio with #105 Resin, has a 20-25 minute pot life at 72°F with 12-18 hours required for solid cure. It has a minimum recommended working of temperature of 60°F. 209 Extra Slow Hardener, mixed at a 3:1 ratio with #105 Resin, results in a pot life of 20-25 minutes at 72°F, with 10-15 hours required for a solid cure.
  • Eligibilities

    Selection Guide



    Отзывы Оставить отзыв

    Отзывы ещё не добавлены

    Вопросы и ответы
    Вопросы отсутствуют.