MGL AVIONICS CHT PROBES

От 10 500 ₽ до 15 000 ₽

Арт.	MPN	Описание	Цена
11-05563	CHT-RING-14	MGL CHT PROBE 14MM SPARK PLUG	10 500 ₽
11-05564	CHT-RING-18	MGL CHT PROBE 18MM SPARK PLUG	10 500 ₽
11-05565	CHT-THREADED	MGL CHT BAYONET 3/8"-24 TYPE K	15 000 ₽
11-05561	CHT-RING-10	MGL AVIONICS CHT PROBES	10 500 ₽
11-05562	CHT-RING-12	MGL CHT PROBE 12MM SPARK PLUG	10 500 ₽

Описание

These are all "K-type" thermocouples and they come in sizes 10mm, 12mm, 14mm and 18mm. The sizes refer to the thread diameter of the spark plug the probes are used on most automotive engines use 14mm plugs, the Jabiru engine and Rotax 912/914 use 12mm plugs. The big Lycomings and Continentals use 18mm plugs. Some motorbike engines use small 10mm plugs.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What type of cable would I use to extend the reach of the MGL Avionics CHT Probes?

Per MGL, this would requre standard Type K extension wire.

Are these thermocouples grounded or ungrounded?

The MGL CHT probes are grounded probes.

Are the MGL probes suitable for certificated aircraft?

No, MGL products are intended for use in experimental aircraft only.

Does this replace the sparkplug gasket or in addition to and or above or below the plug gasket?

It needs to go under the gasket.

Is the bayonette style one that fits into a standard lycoming CHT bayonet fitting?

The Bayonet style probe has the following specs: Lycoming 3/8"-24 thread. If your engine meets the same specification it will fit.

What is the temperature range for these probes?

Per the installation manual these are set on the MGL unit that is purchased. but the recommended settings are: CHT: max 1800C (356F0) - Max. continuous 1600C (3200F) - Min. 500C (1250F)