PSA ENTERPRISES MODEL 936 COMBINATION TAIL / BEACON LIGHT

От 38 070 ₽ до 38 955 ₽

Арт.	MPN	Описание	Цена	Add to cart form
11-12043	936TL&B-24V	COMBINATION TAIL/BEACON LIGHT 24V	38 070 ₽
11-12042	936TL-B12V	PSA ENTERPRISES MODEL 936 COMBINATION TAIL / BEACON LIGHT	38 955 ₽

Описание

Replacement Lamp (part #s) P936-45-12VW and P936-45-24VW Tail Light with Beacon (Combination) for your Grimes or other incandescent tail light unit. Simply remove your current Incandescent lamp and replace it with the combination LED lamp and upgrade to LED’s and add a Beacon at the same time. Completely self-contained with no modifications required. This combination unit will save you 2 Amps as it draws less than .2 Amps. No RFI, Runs cooler and longer, NON-PMA

Color: White LED

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

This combination tail / beacon light states that it will fit where a standard Grimes light would go. Does it need separate wiring for the strobe and nav or is it a selectable function?

Per supplier: The unit mounts in the same mounting holes as the Grimes. We do provide new screws as most often the old one are usually rusty. The unit does not require additional wiring (use the existing wiring) for the grimes. The unit is self contained and all the electronics are in the lamp. The nine LEDs facing to the rear are on continuously while the 36 LEDs around the circumference flash. One circuit controls both functions on one circuit. On or off.

I note on the PSA enterprises Combination tail beacon light it says not PMA'd. Does this mean its for experimental aircraft only?

That is correct, since this is not a PMA'd or TSO'd product, this is for use in experimental aircraft and not certified aircraft.

My Grimes does not rotate anymore due to stripped gears. Can I remove the shield behind the bulb and use this light in a stationary position?

The manufacturer does not recommend modifying the product.

What is the difference between this unit and the PSA #11-12040 (LED tail/beacon light). I have a standard Grimes mounted tail light, do I need this unit or will the drop in bulb (#11-12040) do the same thing? Is this unit and just the drop in bulb rated at the same brightness? Thanks AS, great service as always!

Part # 11-12042 is the full assembly. If you already have the Grimes then the bulb part # 11-12040 will be sufficient for the install.

What is the rated output (lumens or candlepower) of the beacon and the tail light of this PSA combo light?

Per the manufacturer: This is rated at 20 candlepower of the tail light, and the beacon portion is about 100 candlepower.

On my Mooney I have a Whelen power supply, which gives me the beacon flash. Do I need to remove it for this unit?

Yes you would need to remove it, LED lights do not require the power supply.