FAB-TAC FABRIC CEMENT

От 4 350 ₽ до 18 825 ₽

Арт.	Описание	Цена
09-17800	FAB-TAC FABRIC CEMENT	4 350 ₽
09-18000	FAB-TAC FABRIC CEMENT GAL.	18 825 ₽
09-17900	FAB-TAC FABRIC CEMENT QT	5 880 ₽

Описание

A superior quality cement for strong splice joints. Use to cement tapes, rings and grommets to fabric cover. Available in pint, quart, or gallon sizes.

This nitrocellulose type lacquer cement is used to cement aircraft synthetic and cotton fabrics, tapes, and grommets to fabric, cement aircraft fabric to plywood and metal in airplane construction and for attaching upholstery and soundproofing to cabin interiors. It is an excellent all-purpose cement for use on model airplanes. May be added to aircraft dope to improve adhesion to synthetic fabrics (one quart of FAB-TAC to a gallon of DOPE). This smooth flowing adhesive dries in 15 minutes to a tough film with a high tensile strength. May be coated over in 1 hour. Brush coating covers 110 square feet per gallon.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Does this Fab-Tac fabric cement work like poly brush? Can I use it to apply on finishing tapes?

This is a glue like Poly Tak, not a sealer like Poly Brush. It can be used like the Poly Tak for finishing tapes. Be aware it is not part of the Poly Fiber STC, so it can not be used if you are following the Poly Fiber STC.

Is the Fab-Tac fabric cement foam safe?

Yes, this is safe to be used on foam except for styrofoam.

Can you use acetone to thin Fab-Tec for application?

Yes, you can use acetone or MEK to thin this product.

What are the solvents in Fab-Tac? Does it contain MEK or toluene?

It does not contain MEK or Toluene.

Is there a maximum acetone mix in thinning Fab-Tac?

Per Vendor: Fabric cement is like paint, you can use as much solvent (Acetone or MEK) to diluted up to your specific Viscosity.

Is it close to the same as Poly Tac as in quality? And does it thin down 50% like poly tac

It is very close to Poly Tac and can be thinned with Acetone, IPA 99 percent or Methyl Ethyl Ketone. It is not part of the Poly Fiber STC so if you are using the Poly Fiber system you would need to use Poly Tac.