HTR-212 LAMINATING RESIN

От 18 555 ₽ до 250 500 ₽

Арт.	MPN	Описание	Цена
01-00432	5GL RES 2GL HDR	HTR212/H386-99 RESIN 5 GAL	250 500 ₽
01-00431		HTR212/H386-99 RESIN GALLON	50 985 ₽
01-00430		HTR-212 LAMINATING RESIN	18 555 ₽

Описание

RATIO: 100 pbw to 33 pbw

DLRH-3212 is an unfilled, clean epoxy resin system with a long pot life. DLRH-3212 is a tough, strong, impact resistant resin with chemical resistance. It has excellent wetting quality on kevlar, carbon graphite and fiberglass cloth. Used extensively in construction of aircraft, race cars, motorcycles, helmets and sports equipment. Mixing Ratio by Wt: 100:30; Pot Life (200 Gm MASS) 60 Min; Tensile Strength @ 25 C 12,500; Flexural Modulus @ 25 C 40,900; Heat Deflection 325 F; Thermal Shock 72°F–125°F; Shore “D”: 80, Density: Resin: 9.7, Hardener: 7.9, Mixed: 9.1; Shelf Life: Resin/ Hardener 1 Year.

TYPICAL PHYSICAL PROPERTIES
Ratio by Weight	100 pbw to 33 pbw
Pot Life	60 minutes
Heat Distortion Temperature	290ºF

Documents

HTR212tech.pdf

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Does this resin come with hardener? What is the cure temperature? Thanks

This is a kit, which has the resin and hardener. It is a room temp cure epoxy system.

Which hardener does this HTR-212 laminating resin come with?

This kit comes with HTR-212 Resin and HT-386-99 hardener.

Does this resin require a finishing resin coat? How does it compare to MGS regarding fabric wetting out? viscosity? Thanks.

Per the supplier: This resin is very clear. Most people use it for aftermarket parts. A lot of racing people like it as well. Viscosity at room temperature is about 1200cps. It wets out very nicely.