ROCKER SWITCHES ILLUMINATED SINGLE POLE

Арт.

14-305

Описание

ROCKER SWITCHES ILLUMINATED SINGLE POLE

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What are the dimensions of these rocker switches? What is the amperage rating? Will these illuminated rocker switches act as both ON-ON switches, and ON-OFF switches?

The dimensions of the switch faceplate is approximately 1-1/4" x 3/4". Total depth of switch from top of switch to bottom of terminal is approximately 1-1/2". These are 12V / 20 amp switches. They are intended to be used as ON-OFF switches only, not designed for ON-ON.

Are these rocker switches TSO'd?

No, for use on experimental aircraft only.

Are these switches designed so that they push up for on and down for off?

Yes, these switches are designed to be up for on and down for off.

How wide is the spade connection on this switch? They are typically either 0.25 or 0.187.

The spade connection is .25" wide.

Are these Rocker Switches illuminated by LEDs?

No, the bulbs are incandescent.

What are the dimensions for the panel hole?

The panel cutout needs to be 1.12" (28.5 mm) in height, and .55" (14 mm) wide.

I note that there are 3 terminals on the switch. Are they : source, load and ground?

Yes you are correct. This switch is as follows: 1. 12V
2. Load
3. Ground

Are these switches LED or incandescent?

These are incandescent.