754 SERIES LED COCKPIT LIGHTS 14 V

От 14 850 до 15 825
Арт. MPN Описание Цена Add to cart form
11-07483
754R-14V BLACK
LED COCKPIT LGT 754R-14V BLACK
14 850
11-04395
754RW-14V
LED COCKPIT LIGHT 754RW-14V SILVER
14 955
11-07481
754W-14V
LED COCKPIT LGT 754W-14V CLEAR
15 825
11-07487
754RW-14V BLACK
LED COCKPIT LGT 754RW-14VRED/WHT, BLK HOUSING
14 955
11-04393
754R-14V
754 SERIES LED COCKPIT LIGHTS 14 V
14 955
11-07485
754W-14V BLACK
LED COCKPIT LIGHT 754W-14V BLK
14 955
Описание
Note: Light assembly and mount sold separately. See image above. See 'Accessories' to order flush mount.

These versatile cockpit lights can be used to illuminate the instrument panel. They can be repositioned to illuminate your charts with their 110 degrees of angle adjustment while being able to rotate a full 360 degrees. Dimensions: 3/4" diameter, 1-5/8" tall fully-extended, 7/8" tall at 90 degrees.

The mounting stud is 1/4" in diameter and can be mounted onto a surface up to .200" thick. Switchable models facilitate wiring an SPDT switch (not included) to the light, allowing either red or white operation. We also offer a flush-mount flange to mount the light if the back side of the light is unreachable.

Flush Mount - (Pictured above) This part is for mounting and LED light Model 754 from the front side. The adapter base is 1-1/2" in diameter, stands 1-2" tall, and has a 1" bolt hole circle.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Not being an electrician, I would like to know if the 14 volt, 754 led cockpit lights, will operate on a 12 volt system?

Yes, the 14 volt lights will operate fine in a 12 volt system. 12 volt and 14 volt are essentially interchangeable. Regarding Part Numbers 11-04393, 11-07481, 11-04395, 11-07483, 11-07485, 11-07487.

Part number 11-04393 is available with 2 white and 2 red leds. Can they be controlled separately i.e. only white or only red?

Yes, this is not a problem.

What is the MCD output of the 4 Red LED (part #11-04393)?

The output of this unit is 5,000.

What is the wattage of these 754 LED Cockpit Lights 14V?

Per the supplier: The measurement for these is candle power, not wattage. The candle power for 14v is 5000 MCD's. The power consumption is 30 milli amps.

What is the output of these lights in lumens?

Per the supplier: 4,000 milli candle power. We do not have the output info in lumens.

Will these lights work on a dimmer circuit? Are these lights approved for use on certified aircraft?

Per the supplier: "Yes, they will work with dimmers. This model is installed in new certified aircraft from the factory. With that said I have no PMAs or STCs to install them in other aircraft. I have been told if they are not primary cockpit lighting you dont need one but that depends on what fed you talk to."

Are these 754 Series LED Cockpit Lights dimmable?

Yes, these lights can be dimmed with a dimmer.

Are the 754 Series LED Cockpit Lights TSO'd for non-experimental installation?

The 754 Series LED Cockpit Lights are not TSO'd or PMA'd.

You mention that this model is installed on certificated aircraft new from the factory. What aircraft? Thanks.

Per the supplier: Quest Air Kodiak.

Can you recommend a SPDT rocker switch for the 754 SERIES LED COCKPIT LIGHTS 14 V?

Part number AN3021-1 is a SPDT switch which is rated at 14 or 28 volts.

Are these 754 series LED lights approved for use in a certified aircraft?

These are currently used in certified aircraft as auxiliary lighting. If this is used as auxiliary lighting this would not require any PMA or STC. Although if you are using this as the primary lighting then it would require approval.

Can these 754 LED lights be dimmed with an incandescent dimmer or is there a special dimmer per the manufacturer?

No. A special dimmer is not required.

I have these installed in my Commander, they are excellent but too bright. Can you recommend a dimmer? They are installed as accessory lighting.

Please see part #'s 11-10603 | 11-06674 - 12V | 11-07286 - 24V

Are the wiring diagrams available for these lights?

Per the included instructions, connect the green wire to one size of a SPDT switch. The negative should be connected to the center pole of the switch. The red wire should be connected to positive and be protected by a 1amp breaker.

Is there a 28V version of the 754 LED Cockpit Lights 14V?

Yes, see part # 11-04396 for example.