PSA ENTERPRISES LED REPLACEMENT LAMPS FOR NAV LIGHTS

От 10 425 до 10 425
Арт. MPN Описание Цена Add to cart form
11-07745
LED7512-12V GRN
LED7512-12V GREEN LAMP
10 425
11-07746
LED7512-24V RED
LED7512-24V RED LAMP
10 425
11-07749
LED75TPL-24
LED75TPL-24 TAIL POSITION LAMP
10 425
11-07744
LED7512-12VR
PSA ENTERPRISES LED REPLACEMENT LAMPS FOR NAV LIGHTS
10 425
11-07748
LED75TPL-12
LED75TPL-12 TAIL POSITION LAMP
10 425
11-07747
LED7512-24V GRN
LED7512-24V GREEN LAMP
10 425
Описание

Upgrade your Indicating, Position, or Recognition lights to LED's.

These lamps fit standard S.C. Bayonet Indexed Base Sockets (Bay15S). Converts common Incandescent Lamps to LED Lighting without modifications.

It's simple! Just replace your old incandescent bulbs with the new LED Lamps where acceptable. (Use a new clear plastic lens for maximum brightness) and you are ready to go.

Our 15mm (Bay15S) Lamps are available in 12 & 24vdc, Red, Green, and non-indexed Clear. They last longer, run cooler, and draw less than .15amps.

Not PMA'd.

Note: This bulb is a standard 75/12 replacement for any Grimes, Whelen, AeroFlash Wing Tip Light Assembly.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Will this bulb fit for a Grimes 1512 bulb?

The LED base has the same dimensions as the 1512 bulb. It should work just fine.

As this LED nav light is non-PMA'd do I need an STC?

This product is not certified (TSO'd) or PMA'd and so you cannot get an STC for it. If installing on a certified aircraft you will have to obtain a FAA field approval (337 form) as this part is intended for experimental aircraft only.

Will the tail lamp 11-07748 (LED75TPL-12V) replace GE1156? What is the Lumen output of 11-07748 (LED75TPL-12V)? What is the Lumen output of the 11-07744 and 11-07745 (LED7512-12V)?

Yes, 11-07748 will replace GE1156. Regarding the Lumen output, the FAA requires light output be measured (in foot candles). The tail lights (11-07748) require only 20 foot candles output. The wing tip Red & Green require 40 foot candles min. @ 0 degrees. To convert foot candles to Lumens: Lumens per square foot = foot candles multiply by (1). It is a (one to one) to foot candles which says that 20FC = 20 lumens per SQ foot (Taillight). 40FC = 40 lumens per Sq. Ft., (Red & Green wing tips).

I think the prev answer is not quite right. A lumen(lm) is a measure of light flux. If that 1 lumen of flux is concentrated in a cone of 1 steradian, the intensity will be 1 candle power (now renamed candela). There are 4pi steradians in a sphere, so the conversion is 12.5 lumen = 1 candlepower. LEDs are spec'ed in lumens but aviation product should be spec'ed in the more meaningful candela or candlepower as in the regs.

This was the answer we received from the manufacturer. As a distributor only of this product, we cannot say for sure one way or the other as we do not have technical proficiency in these lights.

Will this bulb fit for a GE-1141 bulb?

Per the supplier: No, it will not fit in the same socket.

What is the current draw in amperes of these bulbs at 12v nominal?

Per the supplier: it is less than 0.2 amps.

Is this the complete lamp like I see in the pictures, or only bulb?

This bulb is a standard 75/12 replacement for any Grimes, Whelen, AeroFlash Wing Tip Light Assembly.

Will these replace Whelen PN: W1290-14 lamps?

Per the manufacturer, The LED replacement lamp will fit and work as a replacement for the Whelen lamp. Please keep in mind that for the FAA, it is currently not an approved PMA'd lamp.

Will this fit the Whelen A555A series strobe/tail position light that uses a pn#11-03216 halogen replacemnet bulb?

The PSA Enterprises LED replacement Lamp has not been tested to fit inside the Whelen A555A series light by either manufactuerer and is not recomended as the PSA lamp is not PMA'd and the A555A is FAA TSO'd.

Will the PSA Enterprises LED replacement lamp for nave lights light work in place of a bulb #93?

All #93 bulbs are not the same. Their specifications in Watts, Amps, and Operating Voltages may vary.

Will this bulb fit for Grimes A1285?

Yes, the LED7512-12V (11-07744) LAMP will fit in the Grimes A1285 unit.

Will the tail position bulb fit for a Grimes A2064 tail light?

Yes, the LED75TPL-12V (part # 11-07748) clear lamp will replace Grimes A2064.

Is the manufacture in the process of obtaining the FAA PMA for this lamp?

No, as of 4/16/15 the PSA LED replacements are intended for experimental aircraft only and will not be PMA'd in the near future.

Are the leds colored or are they just plain white?

The tail light is clear, but the wing tip leds are red or green.

Having read reviews on LEDs presenting RF noise with radios, is this an issue with these bulbs?

Per PSA, they are tested to make sure they do not have RF noise.

Will this product work in place of a GE-1073?

It will not, 11-07744 has offset lock pins and the GE-1073 does not.

Are the red and green wingtip LED lamps intended to be used under existing red and green lenses respectively, or do they require clear lenses?

The manufacturer recommends using a clear lens.