UMA ALTIMETERS NON TSO

От 55 425 ₽ до 125 400 ₽

Арт.	MPN	Описание	Цена
10-02436	5-300-20	UMA 3-1/8 ALT 0-10K FT W/ BARO IN HG DIAL	55 425 ₽
10-05126	5-300-42	UMA 3-1/8 ALT 0-20K FT W/ MB 2 REV DIAL	61 785 ₽
10-05133	5-411-10	UMA 2-1/4 ALT 10K MB	116 400 ₽
10-22965	5-300-10	UMA ALTIMETERS NON TSO	55 425 ₽
10-05125	5-300-41	UMA 3-1/8 ALT 0-10K FT W/ MB DIAL	61 785 ₽
10-05132	5-410-20	UMA 2-1/4 ALT 20K HG	110 400 ₽
10-05120	5-300-40	UMA 3-1/8 ALT 0-5500 FT W/ MB DIAL	61 185 ₽
10-05131	5-410-10	UMA 2-1/4 ALT 10K HG	110 400 ₽
10-05883	5-411-50	UMA 2-1/4 ALT 0 TO 3000 MTR WITH MILIBAR DIAL	125 400 ₽
10-02369	5-300-30	UMA 3-1/8 ALT 0-5500 FT W/ BARO IN HG	55 425 ₽
10-05127	5-300-50	UMA 3-1/8 ALT 0-3000 MTR W/ MB DIAL	63 885 ₽
10-05134	5-411-20	UMA 2-1/4 ALT 20K MB	116 400 ₽

Описание

These standard Altimeters are high quality, simple type (single pointer) designed to meet the needs of the low cost non-IFR user. Both altimeters utilize a knob adjustable barometric scale, viewed through a Kollsman Window.
3-1/8 UMA Altimeter
2-1/4 UMA Altimeter
Case: Aluminum Casting
Weight: 10.6 oz. Case: Valox 420 Plastic
Weight: 5.0 oz.
Not FAA Approved

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Is this p/n 10-02436 certified?

No, p/n 10-02436 is not intended for certified aircraft.

Is part # 10-05132 TSO Approved?

No. Part number 10-05132 is not TSO'd. The only TSO'd altimeters that we carry are the United altimeter product line.

Does the 5500 feet altimeter show higher altitude (second time around) like the falcon 6000 / 12000 feet model?

It will continue to go around, but you will not have a third hand to indicate whether or not you are above or below the 5500 feet.

Are the UMA altimeters listed on this page lighted or non-lighted?

These instruments are non-lighted.

Does this altimeter have a single hole in the back for the tube to attach? Where is it manufactured?

For the 3-1/8" Altimeters, no connection is required unless it is installed in a pressurized cabin or a open cockpit with moving air behind the panel. It is not to be connected to static line. If a line is needed, it should be flexible tubing 1/4" OD X .028" - .035" ID. All UMA instruments are manufactured in the United States.

What is the rear depth of the UMA altimeter units?

The depth of the unit is 2.75 inches.

UMA 3-1/8 ALT 0-20 Part # 10-22965: Is this instrument TSOed and if so, does than mean it is IFA certified?

No, these altimeters are not FAA Approved. They are intended for use in experimental aircraft only.

Can p/n 10-05120 be used for AGL only in an ultralight?

Yes, this can be used in an ultralight. This unit only goes up to 5,500 feet.

Good morning, P/N 10-22965 is 0 to 20,000 ft?

Yes, that is correct.