AVIATION OIL FILTER CUTTER KRC-1203

20 325 ₽

Арт.

12-21395

Описание

This aviation oil filter cutter will open any size oil filter canisters for your inspection. To use the tool, place the filter in a vice, attach the tool to the top of the filter, & rotate 4 to 6 turns to open the canister. Cutting wheel will stay sharp for about 50 uses, and is easily replaced when dull.The tool is made from 6061 aluminum anodized finish. The tool is ready to use on any oil filter with a male or female thread.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Where can I get a replacement cutting wheel for this Aviation Oil Filter Cutter?

We have the replacement cutting wheel listed in the "Accessories" tab on this web page. It is part number 12-21396 and is available to order.

Will this aviation oil filter cutter work with the oil filters on a Rotax 912?

Yes, it will.

Will this cutter open automotive oil filters?

We do not have any information on the use of this cutter with auto filters.

Does this cutter come with an adapter to open filters with a male thread such as the CH48110-1 ?

This comes with a standoff that you would have to use to cut a male filter.

How does this cutter work for male thread such as CH48110-1?

In short, the threaded stud on the filter is hollow, so one of the studs that come with this oil can cutter gets installed and hollow part of the threaded stud on the filter goes over the stud on the tool and then proceed as normal to cut the filter.