AIRCRAFT EXTRAS ROLL BAR GRAB HANDLES

Application

• Attaching the handles involves NO welding! Each handle has two, #10-32 threaded holes in the handle ends. Mounting is simple.
• 1. Simply drill a #10-32 clearance hole thru your roll bar (forward and aft sides).
• 2. Enlarge the aft side holes to a diameter of 5/16".
• 3. Shove the handles into the 5/16" holes until the handle ends butt up against the forward #10-32 clearance holes.
• 4. Install two, #10-32 screws.
• (You may even opt to countersink the #10-32 screw clearance holes to utilize flat head screws.
• If you use a standard bolt and are concerned with the appearance of the large head, you can even grind the head down flatter for a better look. These handles work great!)