DYNAFOCAL ENGINE MOUNT RINGS & KITS

От 47 025 ₽ до 89 985 ₽

Арт.	MPN	Описание	Цена
33253	33523	DYNAFOCAL RING&CUP SET ONLY	47 025 ₽
33522	33522	DYNAFOCAL RING KIT #33522	65 700 ₽
33521-B	TYPE 2	DYNA RING # 33521-B	89 985 ₽
33521		DYNAFOCAL ENGINE MOUNT RINGS & KITS	89 985 ₽

Описание

Standard rings furnished with 2-3/4" I.D. retainers, completely welded, ready for mount assembly. The Dynafocal ring kits contain all tubing cut and bent, with 2-3/4" I.D. retainers, ready to weld.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What are the differences between the 33521, 33521-B, and 33522 dynafocal rings?

The 33521 is the standard mount with all the rings welded to the tubes to make a complete mount. 33521-B is similar to the 33521 but is a type 2 mount, which has an 18 degree angle. 33522 has the 2-3/4 inch I.D. retainers and the tubing cut and bent, and they must be welded all together to make the mount.

What's the outside diameter and thickness of the tubing for Part # 33521?

It is 1" x .049".

What's the trace-ability of the full welded mount for certification purposes? Is it manufactured in-house?

No, we are a distributor of aircraft parts only and do not conduct any manufacturing. We have full traceability back to the manufacturer on all of our parts.

You say the 33521 is the 'standard mount'. Does that mean it's Dynafocal I, since the B model is Type II?

Yes, 33521 is a Type I.

Is the 33522 a type 1 or type II Dynafocal?

This is a Type 1 Dynafocal.

What is the inside diameter of the rings on 33521 kits?

The ring ID is 2-3/4 and the hole ID is 1-3/8.

What are the dimensions of the full part? How far ar the rings apart and what are the dimensions of the tubes?

The rings are 13" center to center side-side and 10" center to center fore-aft. The tubing is 1-5/16" ID, 3" OD and .049" wall.