CAMGUARD AVIATION OIL ADDITIVE

6 885
Описание

ASL CamGuard is a comprehensive additive package formulated to supplement specific functions in a wide variety of motor oils. It was designed to dramatically improve the performance of all mineral based , semi-synthetic and fully synthetic motor oils in the areas of corrosion protection, wear reduction, and seal protection.

Camguard is an advanced oil supplement designed to give regular engine oil what it needs to protect and lubricate any engine. Camguard is a synergistic blend of advanced oil additives from all over the world, designed to reduce wear, curb deposit formation and more importantly protect engines against rust and corrosion. It contains multiple corrosion inhibitors for both ferrous and non-ferrous metals. A combination of ashless anti-wear compounds, anti-oxidants designed to reduce carbon deposits and special seal conditioners to prevent oil weeping. Camguard is FAA accepted and approved for use in piston engine aircraft oils meeting SAE-1899 standards. Camguard is compatible with piston aircraft oils, passenger car motor oils, most marine oils, and heavy-duty diesel oils.

Features
  • FAA accepted
  • Fights rust & corrosion
  • Vastly reduces engine deposits
  • Provides extreme pressure and anti-wear protection
  • Conditions engine seals for extended life
Арт. MPN Описание Цена Add to cart form
08-07096
CAMGUARD AVIATION OIL ADDITIVE
$ 22.95
08-14636
CAMGUARD 1 GALLON
CAMGUARD AVIATION OIL ADDITIVE GL
$ 189.95
08-07097-1
CAMGUARD AVIATION OIL ADDITIVE 12 PACK CASE
$ 245.95
08-07097
CASE OF 4 PTS
CAMGUARD AVIATION OIL ADDITIVE 4 PACK
$ 91.50

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
How much CamGuard do I use per oil change? I use AeroShell mineral. Thanks.

Per the manufacturer, one pint of CamGuard will serve 8-10 quart sump for the change.

Is there a shelf life for Camguard aviation oil additive?

Per the supplier: The shelf life is indefinite.

Is CamGuard safe to use in 15W-50 oil? I understand 15w50 has additives blended in and I dont want to add camguard if doing so would have adverse affects. Thank you

Per the supplier: Yes. CamGuard is perfectly safe to use with 15W-50 oil.

I have a 12 quart sump, what is the correct amount of Camgaurd to use at oil change?

The correct ratio is 1.6 oz of Camguard per quart. So for 12 quarts, you would need 19.2 oz.

Just had the annual done on my 1976 C182P. Oil change with 10 qts added out of 12 available in sump. Have only done two high speed taxis since the annual. Can I add Camguard at this time?

It is recommended to add Camguard during each oil change. You would add 1.6 ounces of Camguard Aviation with each quart of makeup oil between oil changes.

Does CamGuard retard break-in or cause it to cease if used during new engine break-in period?

Camguard is made NOT to be used during the break-in period of a new engine.

Can CamGuard be used with Aeroshell 15W-50 oil which already has additives?

Yes, this can be used with 15W-50.

Can and should Camguard be used with PHILLIPS 66 X/C AVIATION OIL 20W50?

Yes, this is one of the preferred oils that Camguard recommends mixing this with.

I just changed my oil (8 qtrs). Do I just add it on top of the new oil? Is it ok to add it even if the new oil has a couple of hours?

Per Camguard: You would need to discuss this with the engine manufacturer or your A&P for this information.

Is it safe to use Camguard with Aeroshell W100PLUS?

Yes it is safe but it will not do any better with the camguard as the W100plus already has an additive IN it.

Can you use Camguard with Shell sport plus 4 oil in a Rotax 912?

No, it is not recommended and not necessary. Sport 4 alone is fine.

Is this Camguard product an FAA approved product?

This is an FAA accepted product that meets SAE-1899 aircraft oil standards.

Is Camguard ok to ship via UPS for Australia?

Yes. This product is not considered hazardous for shipping.

What is the difference between Camguard Aviation and Camguard Auto?

The engineers designed each for its specific application. Use Aviation blend for aircraft engines, and the Auto for automotive applications. We do not have the detailed chemistry for each.

My oil was changed 3-4 hours ago, and some oil has already blown off. Does camguard have to be added at oil changes only? Is it too late to add it?

It can be added at anytime, its just easier to get the ratio correct when performing the oil change.

Can camguard be used with Phillips 66 X/C Victory oil that has the lycoming LW16702 additive in it?

Yes, it can be used with Phillips 66, however, since the Phillips already has an additive, the benefits of Camguard may be reduced.

Is Camguard safe or recommended with Phillips 66 25-60 X/C in a Jacobs Radial Engine?

Yes, per Camguard, many people use this product in radial engines.