RAPCO DRY AIR VACUUM PUMPS - NEW

От 110 400 до 298 500
Арт. MPN Описание Цена Add to cart form
10-23950-1
RAP241CC
RAPCO RAP241CC NEW AIR PUMP
194 700
10-03449
RAP242CW-4
RAPCO RAP242CW-4 NEW AIR PUMP
194 700
10-03075
RAP441CC-7
RAPCO RAP441CC-7 NEW AIR PUMP
277 500
10-01127
RAP442CW
RAPCO RAP442CW NEW AIR PUMP
275 400
10-01128
RAP442CW-12
RAPCO RAP442CW-12 NEW AIR PUMP
298 500
10-23935
RAP216CW
RAPCO RAP216CW NEW AIR PUMP
110 400
10-23960-1
RAP242CW
RAPCO RAP242CW NEW AIR PUMP
197 700
10-03074
RAP441CC-3
RAPCO RAP441CC-3 NEW AIR PUMP
270 900
10-03078
RAP441CC-23
RAPCO RAP441CC-23 NEW AIR PUMP
270 900
10-03081
RAP442CW-8
RAPCO RAP442CW-8 NEW AIR PUMP
277 500
10-03401
RAP215CC-9
RAPCO RAP215CC-9 NEW AIR PUMP
110 400
10-03448
RAP241CC-15
RAPCO RAP241CC-15 NEW AIR PUMP
194 700
10-01126
RAP441CC
RAPCO RAP441CC NEW AIR PUMP
270 900
10-03077
RAP441CC-17
RAPCO RAP441CC-17 NEW AIR PUMP
277 500
10-03080
RAP442CW-6
RAPCO RAP442CW-6 NEW AIR PUMP
278 700
10-03083
RAP442CW-20
RAPCO RAP442CW-20 NEW AIR PUMP
270 900
10-23925
RAP215CC
RAPCO DRY AIR VACUUM PUMPS - NEW
110 400
10-03447
RAP241CC-13
RAPCO RAP241CC-13 NEW AIR PUMP
195 300
10-03450
RAP242CW-10
RAPCO RAP242CW-10 NEW AIR PUMP
194 700
10-03076
RAP441CC-9
RAPCO RAP441CC-9 NEW AIR PUMP
270 900
10-03079
RAP442CW-4
RAPCO RAP442CW-4 NEW AIR PUMP
275 400
10-03082
RAP442CW-14
RAPCO RAP442CW-14 NEW AIR PUMP
270 900
Описание

RAPCO DRY AIR VACUUM / PRESSURE PUMPS
Rapco dry air pumps are FAA-PMA approved direct replacements for Airborne and AA.

NEW RAPCO PUMPS are FAA-PMA approved and come with an inspection port and tool to help determine replacement time, and an internal oil seal to help keep out contaminants. Mounting gasket included. Warranty period on the 200 series is three years / 1300 hours. The warranty period on the 240 and the 400 series is 1 year / 500 hours, which ever comes first. There is no Core Charge on new pumps.

OVERHAULED RAPCO PUMPS are FAA approved and come with an FAA form 8130-3. Mounting gasket included. The warranty period for the 200 series is two years / 1000 hours. The warranty period for the 240 and the 400 series is one year / 400 hours, which ever comes first. Core charge applies.



NO CORE CHARGE
Contact RAPCO for details on receiving a $25.00 dollar bonus for your old core.
http://www.rapcoinc.com/

Mounting flange gasket is included.

Application Guide
Download Complete Rapco Catalog (PDF)

Documents

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Do the New Rapco Dry Air Vacuum Pumps listed on this page come standard with an 8130 form?

Yes. All Rapco approved parts now come with an 8130-3 form that is good for export as well as domestic.

What is the difference between a RAP215CC and a RAP215CC-9?

Per Rapco: Any pump will run mounted in any position however the 215CC-9 dry air pump was primarily designed to hang vertically on the bottom of an Continental O-200 engine, in a location with a high probability of oil contamination. If oil gets into the pump it will gum up the vanes and they will cease to produce suction. Oil contamination is the number 2 cause of premature dry air pump failure next to foreign object damage. Airborne attempted to deal with this contamination problem by putting a slinger ring on the drive shaft to throw off any oil that might happen to drip down.

Are dimensions available? Specifically the drive-face to rear dimension on the 216CW.

From the drive-face or mounting pad, to the furthest rear location is about 4.350 inches.

Can you advise which filter goes with your 10-23925. RAP21500?

There is not a specific filter to pump application. The aircraft parts manual will show the filter used for that airframes vacuum system. Otherwise there are several to choose from, like p/n RA1J7-1.

Does the rapco 215cc replace the rapco 211cc and are they the same dimensions?

Yes, they are interchangeable and will have the same external dimensions.

Do the new Rapco dry air vacuum pumps come with a new gasket?

Yes the gasket is included.

I have a tempest AA3215CC, is there a Rapco that can replace it?

RAP215CC new, our part # 10-23925. 215cc overhauled our part # 10-03084.

I am replacing an Airborne 200CC vacuum pump. What is the new Rapco equivalent number?

P/N# 10-23925 will be the correct replacement as the 200CC has been superseded to the 215CC pump.

I need to replace an airborne 215cc. Will this Rapco 215cc work?

Yes, the Rapco 215cc replaces the Airborne 215cc.