GROVE AXLE REALIGNMENT SHIMS

8 550
Описание

Install these axle shims between your landing gear and axles to insure that your tires track true.
Correct any misalignment of toe-in or toe-out in 1/4" increments.

Features

Selection Guide

How to Select the Proper Axle Shim

1. Support the aircraft in level flying attitude.

2. Chalkline the center-line of the aircraft onto the floor. Do this by connecting a mark on the floor from directly beneath the center of the firewall (use a plumb-bob) and from directly beneath the center of the tail (also using a plumb-bob).

3. Place a 36" straight edge against the outside of the tire. It should be parallel with the floor and approximately centered on the wheel.

4. Make a mark on the floor directly beneath each end of the 36" straight edge. Use a plumb-bob or square for this.

5. Measure and record distances D-1 and D-2. These are the distances between the marks in step 4 and the aircraft center-line.

6. Calculate Delta D, which is the difference between D-1 and D-2. Delta D changes by 0.157" for each 1/4".

To Change Delta D by 0.10" - 0.25" Use 1/4" Shim
To Change Delta D by 0.25" - 0.40" Use 1/2" Shim
To Change Delta D by 0.40" - 0.55" Use 3/4" Shim

Eligibilities
Арт. MPN Описание Цена Add to cart form
06-00928
6102-1
GROVE AXLE SHIM 6102-1
$ 28.50
06-00927
6101-3
GROVE AXLE SHIM 6101-3
$ 28.50
06-00926
6101-2
GROVE AXLE SHIM 6101-2
$ 28.50
06-00930
6102-3
GROVE AXLE SHIM 6102-3
$ 28.50
06-00925
6101-1
GROVE AXLE REALIGNMENT SHIMS
$ 28.50
06-00929
6102-2
GROVE AXLE SHIM 6102-2
$ 28.50

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
How many shims are included with Part Number: 6102-3?

This is sold per shim. So only 1 is included in P/N# 06-00930.

Is the 1/4 inch shim rotated to adjust toe in from .10 to .25 and the 1/2 shim rotated to adjust from .25 to .40?

The shims are in degrees, so if you order a 1/4 degree shim that will give you a 1/4 degree correction. They are not adjustable.

What is the difference between 500x5 & 600x6? I have a Cessna 180.

That is the wheel / tire size. For the Cessna 180, you will need the 600x6.

Will this work with the MATCO AXLE A1?

You would have to check your axle dimensions using the PDF in the Documents section.