MATCO MCMC-4 MASTER CYLINDER

От 35 055 ₽ до 36 525 ₽

Арт.	MPN	Описание	Цена	Add to cart form
06-11100	MCMC-4A	MATCO UNIV.MSTR CYL MC-4A	36 525 ₽
06-11150	MCMC-4	MATCO MCMC-4 MASTER CYLINDER	35 055 ₽

Описание

MATCO mfg's MCMC-4 master cylinder uses a REMOTE reservoir. The MCMC-4 can be used in individual or dual brake applications. Buna-n orings are used in this assembly. Mil-H-5606 aircraft hydraulic fluid or compatible fluids are reccomended. DOT5 may be used but not DOT5.1 which contains glycol. DOT3 and DOT4 may not be used and will cause immediate damage to the seals.
Umiversal - Vertical or horizontal mounting with exterior reservoir.

Tested to a maximum of 1200 psi. Normal operation: 400-600 psi.

Features

The MCMC-4 has an adjustable clevis.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

You state that the MCMC-4A is 0.5" shorter than the MCMC-4. Where is this 0.5 taken from, the cylinder or the stroke?

The body of the master cylinders are the same, the stroke for the MCMC-4A is 0.5" shorter than the MCMC-4 unit.

Can the mcmc-4 be mounted with either end up?

They will function fine with once bled with the shaft up or down. It is preferred to have the shaft end higher since the natural flow of any air in the hydraulic system would flow from the outlet port (the lug end) to the inlet port (the shaft end) easily.

What is the difference between the Matco MC-4 and MCMC-4 master cylinder? Could the extra MC be a typo?

"MC-4" is a typo, the correct model number is "MCMC-4."