MATCO MCMC-5 MASTER CYLINDER

От 36 525 ₽ до 38 655 ₽

Арт.	MPN	Описание	Цена	Add to cart form
06-00375	MCMC-5A	MATCO BRAKE CYLINDER MC-5A	38 655 ₽
06-11000	MCMC-5	MATCO MCMC-5 MASTER CYLINDER	36 525 ₽

Описание

MATCO mfg's MCMC-5 master cylinder uses a INTERNAL reservoir. The MCMC-5 can be used in individual or dual brake applications. Buna-n orings are used in this assembly. Mil-H-5606 aircraft hydraulic fluid or compatible fluids are reccomended. DOT5 may be used but not DOT5.1 which contains glycol. DOT3 and DOT4 may not be used and will cause immediate damage to the seals.
The MC-5 has an adjustable clevis. The MC-5 can not be used in series with a second MC-5 or MC-5A.
Vertical Style - Cylinder for vertical mounting, with steel housing and reservoir.

Documents

mc5drawing.pdf

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What is the diameter of the resorvoir? This will help me with clearance design around my feet.

Please view the MC-5 Drawing found in the "Documents" tab of this web page for all dimensional information.

Can these Matco MCMC-5 master cylinders be used on certified aircraft?

No, these are intended for use on experimental aircraft only.

How is the reservoir filled when bleeding the system?

The system is bled from the caliper up. The reservoir is considered full when it is about 1/4" below the cap.

Do you have a seal replacement kit for these reservoirs?

The reservoir on the MCMC-5 is vented to atmosphere and is not sealed. There is an o-ring under the cap but its function is to keep fluid from sloshing out. The reservoir has to be the highest point in the hydraulic system of fluid can run out of it.