J.P. INSTRUMENTS FUEL SCAN FS450 FAA TSO

От 154 200 ₽ до 154 500 ₽

Арт.	MPN	Описание	Цена	Add to cart form
10-00135	450000-P	JPI FS 450 FUEL INJECTED ENGINE WITH FUEL PUMP	154 200 ₽
10-00134	450000-G	J.P. INSTRUMENTS FUEL SCAN FS450 FAA TSO	154 500 ₽

Описание

TSO C44b
Continuous display of fuel burned,in upper display in
Gallons per Hour. Liters and Lbs per hr also available.
An amazingly low price includes Instrument harness and a Flow Scan 201 or 231 transducer.
Upgrade your old Hoskins, or Shadin System. Will function with any K factors; connector is pin to pin compatible.
Automatically calculates the K factor.
All programming done from the front panel.
Size 2.25" diameter (small hole)
Light Weight 5 oz with Super Thin 1.5" depth
Three year warranty. (yes, the only three year warranty around!)
Serial port sends and receives data from all GPS units, even handhelds.
Calculates fuel to next waypoint.

Displays All These Functions:

Total Fuel Used
Fuel Remaining
Endurance in Hours and Minutes
Fuel Required to next Waypoint
Fuel Reserve at Next Waypoint
Nautical miles per Gallon

Features

FS-450 Can Mate to an old Shadin or Hoskins System.
Gallons per hour can be changed tap litres or Lbs.
QUE lights indicate which function is being displayed in the lower display
Auto Button, starts the automatic scan of the functions. Rate can be set from 1-9
Continuous display of fuel burn in Gal/Lbs/Litres per hour.
Step button can index information forward or backward. All programing done easily from the from panel with two buttons and no switches to toggle.

Documents

fs450install.pdf

f450installff.pdf

fs450pilotsguide.pdf

Parts per assembly

In The Box

Indicator
Fire Sleeve
Harness
Transducer
Pilots Guide

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Does the JPI FS 450 GRAVITY FED (P/N: 10-00134) come with a FAA FORM 8130-3?

No, these do not come standard with an 8130-3 form. These must be requested at the time of order.

Does the JPI FS 450 unit include the transducer?

Yes it does as you have to select gravity fed (231) or fuel pump (201) system.

I just purchased a 1966 Piper PA28-235 with no current fuel computer system installed. What else do I need to order with the JPI FS 450 for my mechanic to install the system?

Please note that the FS 450 cannot be used as a primary fuel flow in your panel (in can be used for secondary). The JPI FS 450 comes with all the parts to install the FS 450 but other parts like tubing and connections from your fuel system need to be ordered separate. We recommend you and your mechanic review the manual on our documents tab before ordering to make sure the install is efficient.

I just purchased a 1966 Piper PA28-235 with no current fuel computer system installed. What else do I need to order with the JPI FS 450 for my mechanic to install the system?

What is included with the J.P. Instruments Fuel Scan FS450? Is it compatible with a Cessna 182R?

Items included are the indicator, fire sleeve, harness, transducer and pilots guide. If you want to use it with your Cessna, you will need to use the gravity fed version (10-00134).

I have a Cherokee 180 and wanted to add this to augment my fuel gauges. Can I install the FS450?

The manual describes the procedure for installing the Fuel Scan FS450 as a secondary gauge including the necessary placards you must include with the installation of the gauge.

Which J.P. Instruments Fuel Scan FS 450 would work on a Cessna 150M?

For a Gravity Fed Fuel aircraft such as the Cessna 150 series you would need part number 10-00134.

Does the FS450G have the flow labelled in Gal/Hr on the gauge, or is the label units/hr?

The JPI Fuel Scan FS450 is programmable to either gallons, pounds or liters.

I have the EI Red Cube transducer fitted. Is that compatible with the JPI FS 450?

The recommended transducers are listed for the FS450 in the installation manual by JPI. Using another manufacturer’s transducer is not recommended or tested.

Is there a wiring harness available for the FS 450 transducer to indicator?

For the fuel scan FS450, part numbers 10-00135 and 10-00134, the harness is included with the instrument.

Will the P/N: 11-08072 be the same transducer which is included with P/N: 10-00135? If not, which one will be the same if I need two transducers?

No, the correct fuel flow transducer for the FS 450 is part number 10-27089. This is for the fuel pump version.

In a 1964 piper cherokee 150. Would this be a suitable fuel flow meter? Could you please explain the primary vs secondary fuel flow in the panel that you refer to in your 3rd answer above.

The FS450 can not replace your primary fuel flow meter. This can only be used as a backup gauge.

I'm using Facet fuel pumps with psi range 6.0-4.5, will the JPI FS 450 gravity fed part number 10-00134 work for me?

The gravity fed version part number 10-00134 will work if you have a high wing aircraft. For a low wing aircraft we recommend the fuel pump version part number 10-00135.

I have the Garmin Aera 796 and I want to purchase the JPI FS450. I know the 450 will connect to the 796 per JPI. What is the part number for the cable that will connect to the 796 to the FS450, or is there a guide as to which wires can be spliced into on the 796?

The power / data cable part number 11-10044 will allow you to connect with a RS-232 device.

Can I connect my Garmin AERA 500 to the FS 450 and what part number/s are required? Do you carry the connectors?

Yes, you can connect the Aera 500 to the FS 450. You will need P/N 11-08088 and pin the RS-232 cable to the FS 450's connector.

Is the JPI Fuel Scan FS450 unit compatible with a GTN 650 and Aera 796 GPS units? If so, what is required to install?

This unit has both an RS 232 in and out capability and is compatible with Garmin GPS units. Installation will require an RS 232 in/out connection available on the GPS unit.

I am using my iPad with Foreflight with a Dual type bluetooth GPS, is there anyway to link the FS450 up to that GPS or iPad?

No. The Dual bluetooth GPS does not have provision for a physical connection to any other devices. The USB port is used for charging only.

What part # do I need to connect my Garmin GPSMAP 296 to my JP FS-450?

You will need a power/data cable, part number 11-02694, which will work with the 296.

Will a JPI FS-450 #10-00135 work in a Cessna 172 as long as I have a gravity fed transducer model 231?

Yes, this can be used in your Cessna as long as you have the correct transducer.

How does the JPI 450 know fuel to waypoint and fuel left at way point?

This unit comes with senders/sensors that indicate the necessary measurements.

Looking to install in Bell Jetranger. How much does the flow rate go up to in the FS450? The high flow unit is out of stock. We would be looking for a rate of about 30 gph.

This is dependent on the transducer. Per the manual: Fuel injected: 0.6 to 60 gph, Gravity Fed: 3 to 90 gph.

I have a 1974 Piper Archer and wondering if I need the gravity or fuel pump version?

The Piper Archer is a low wing aircraft. Low wing aircraft generally need the fuel pump version. High wing aircraft use the gravity fed.

I have Cessna 205, gravity fed & fuel injection?

The Cessna 205 is a high wing aircraft. High wing aircraft generally use the gravity fed system. Low wing aircraft generally have a fuel pump.

For new fuel hose ordering. What is the overall length of the gravity fuel flow transducer for the FS-450? Thanks

Part # 10-00135 uses the 201 transducer, which has the following measurements: 1.45 inches X 1.615

Whats the length of the harness/wires?

Per the installation manual the length of the wiring is 6 feet