PS ENGINEERING PM 1200 2 PLACE MONO HIGH NOISE PANEL MOUNT INTERCOM NON-TSO FOR EXPERIMENTAL AIRCRAFT

От 140 985 ₽ до 261 000 ₽

Арт.	MPN	Описание	Цена
11-02558	11961	PS ENG PM 1200 2 PLACE MONO BLIND MOUNT INTERCOM NON TSO	164 985 ₽
11-14760	ASA-00034-CU	PS ENG PM 1200 KIT W/ 2 PLACE CUSTOM HARNESS	238 200 ₽
11-01671	11960	PS ENGINEERING PM 1200 2 PLACE MONO HIGH NOISE PANEL MOUNT INTERCOM NON-TSO FOR EXPERIMENTAL AIRCRAFT	140 985 ₽
11-14761	ASA-00036-CU	PM 1200 BLIND MOUNT INTERCOM KIT W/ 2 PLACE CUSTOM HARNESS	261 000 ₽
11-14761	ASA-00036-CU	PM 1200 BLIND MOUNT INTERCOM 2 PLACE CUSTOM HARNESS	261 000 ₽

Описание

For Experimental / LSA / Non-Certified Aircraft only.

The PM1200 is a two place panel mount intercom intended for use in open cockpit and extremely loud of aircraft.

Direct replacement for PM1000II series.
Reduces noise that is picked up by the microphone, dynamically reducing the background noise heard in the headset when the VOX is opened.
Audio amplifiers supply general aviation headset as much as 120 mW (almost twice that of our regular intercoms) in 28 volt aircraft.
Able to handle the noise of cockpits such as the P-51, B-17, PV-2, T-6, T-28, and the Pitts S2B/C
By a push of the Copilot volume control, the system will convert to VOX to PTT-ICS.
The unit can be used as either voice-activated, or push to talk intercommunications, by simply pushing a front panel switch.
Has an automatic fail-safe interconnect to the aircraft radio. If power to the intercom is disrupted, an internal relay will connect the pilot's headset to the aircraft radio.
The Blind Mount configuration option allows the installation of this intercom completely in the confines of the original equipment of the aircraft. You can keep your aircraft authentic while still having the best intercom available.

Eligibilities

Harness

PS Engineering requires all units to be sold with custom harness in order to maintain factory warranty. Units sold without harness will receive no factory warranty. All PS Engineering orders with custom wire harness are build to order and require all questions to be filled out to process correctly. Any custom order not complete will cause delays. All custom harnesses are built to IPC-WHMA-A-620 standards via the manufacturer’s installation manual. Any additional comments or special requests may be noted in the Special Instructions field at checkout for review by the avionics team. For questions regarding custom harnesses for PS Engineering please email avionics@aircraftspruce.com or call us at 800-826-3160.

Documents

PM1200Pilot.pdf

PM1200Install.pdf

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Does the PM1200 have solder connections (?) or does it have to be used with the very expensive Amp Crimp tool. Called PS Engineering they thought the connection could be soldered too. Can you verify before I order one.

No, the PM 1200 does not have solder connections. The harness uses a 25 pin female d-sub connector. We do not carry solder connectors, however if you are able to find a 25 pin female connector with solder cups you can use that instead. Or We can make the harness for an additional cost, add part number 11-13141 and all of the work will be done for you.

Does the custom harness come with the jacks already attached? I do not want to mess with any soldering. I just want to put it in. Have enough issues with the intercom that is in my plane. I want to know that the harness is correct!

Yes, jacks are attached.

Can a PS 1000 replace a PS 501 by using the existing 501 wiring harness?

No, if you want to add a PS 1000 you will need a new wire harness. If you would like a direct replacement that would be the 500 EX part # 11-11800.