AE AG6 ANNUNCIATOR & GAUGE & METER - ALL IN ONE

50 985
Арт.
10-04180
Описание
UP TO 6 INSTRUMENTS IN ONE
The AG6 is a full service Aircraft Annunciator, Fuel Gauge, Oil Level Gauge, Volt Meter & Current Meter.

Click here to see all screens available

The annunciator will display many different aircraft warnings. All devices feature user programmable alarms. The AG6 utilizes a push-button LCD display that is backlight with a 3 color LED. All functions are fully programmable by the user. The push-button/display can be used for programming, acknowledging the alarms, and paging thru up to 16 different screens or "annunciator points". The AG6 can automatically scan thru each screen or it can be done manually using the push-button. The pilot has the ability to mask or unmask annoyance alarms.

NOTE: Input devices not included. It is up to the user to provide input devices such as fuel senders, shunts, oil level sensors and input switches to drive the AG6

DISPLAY & PUSH BUTTON
Display can be easily mounted in the panel anywhere you can make a square hole. It is a snap to install ! Measures 1.25" wide by 1.0625" high by 1.375" deep, including bezel housing

SIGNAL INPUT BOARD
Signal input/driver board mounts lower in the instrument panel for easier wiring. This permits a better location of inputs & connections in a crowded aircraft. Measures 2.25" wide by 2.5" high.

RIBBON CABLE
The 18" ribbon cable makes it easy to install and remove if necessary. Plugs are provided at both ends.

Features
  • Full service annunciator (more than 70 alarm to choose from)
  • Volt & current meter with alarms
  • 10 types of fuel gauges with alarms
  • Low oil level gauge
  • Up to 6 inputs (5 if sound output is selected)
  • Set-up is fully user programmable
  • One button programming
  • Alarm time delays up to 409 seconds
  • Input signal filtering
  • Manual or auto scan for screens
  • Special shunt input
  • Audio output during alarm

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Is the AE AG6 Annunciator & Gauge & Meter FAA STC'd?

The AE AG6 Annunciator & Gauge & Meter is not FAA STC'd.

The installation manual doesnt list the screen definition numbers, which are required to program the AG6. Can you add them to the documents list?

The full list of possible displays has been added to the documents tab as "Available Screens," and the screen definition numbers are listed in the same location as "Screen Definitions".