RAM IPAD MINI UNIVERSAL TABLET HOLDER WITH CASE

7 185 ₽

Арт.

11-12269

Описание

The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet.

Material: High Strength Composite

Features

Support cups contain open slots to accommodate for tablets of various sizes
Back plate can support various size support cups
Spring loaded tension provides secure support for your tablet
Spring loaded cradle allows for quick release of your tablet
High strength materials maximize longevity of cradle
Full access to all ports
Lifetime warranty

Eligibilities

Compatible Devices

Apple iPad mini WITH CASE, SKIN, SLEEVE
Apple iPad mini (with Retina display) WITH CASE, SKIN, SLEEVE
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Do you supply a yoke mount for this RAM mount? The way I understand this is that I still need to buy the actual yoke mount?

Yes, the yoke mount to order would be part # 11-00484. You will also need an arm and adapter to connect the device holder to the yoke mount. If you search "Ram Builder" on our website you can use our selector system to put the kit together that you need.

I have an extra Garmin yoke mount for an Aera 560. Will the holes in this match up with the holes in my Garmin yoke mount. I can always drill new holes, but was curious. How far apart are the holes on the back ?

The ram iPad mini holder has a rear mounting bracket with a distance of 1.91" from center to center.

Will this Ram iPad mini universal tablet holder fit a Mini 4 in an Otter case?

Please measure your iPad with case to confirm the following dimensions before ordering:
Height: 6.80" minimum to 9" maximum | Width: Maximum width to 5.68" | Depth: 0.125" minimum to 1" maximum

Which type of mounting is on the back? The video showed a 2 screw mount but the picture shows a 4 screw mount. I just changed from a (5 yr old) iPad to an iPad Mini 4 and am trying to replace my iPad holder but still use the 1 inch ball socket on the back with 4 screws and the rest of my 2 suction cup Ram mount that I have been very pleased with.

Both the 2 screw adapter and the 4 screw adapter can be used. If you have the 4 screw adapter, our part # 11-07069 it will work just fine.

Do you supply this Ram Ipad Mini universale holder unit with hardware?

Yes that will come with screws and nuts to attach the ball mount.

Does it work in both landscape and portrait mode?

Yes, it works in both landscape and portrait.