ANR HEADSET RETROFIT KIT
The M-001-A ANR Adapter is a product that will transform a current aviation headset into a high-tech active noise reduction unit. The ANR Adapter comes as a kit and includes a pair of inserts that fit more than 20 different headset models. Installation requires fitting the inserts, drilling a small hole in one earcup for the power receptacle, and soldering the original cable leads to the kit replacement parts. (uses one 9-volt battery).
IMPORTANT:
It is mandatory that you use "silicone gel" type earseals. The original earseals (dry or liquid filled) are not as airtight as gel seals, and in addition do not dampen sound and vibration as effectively.
The result is that the ANR units will greatly underperform (20-50%) and will be more likely to malfunction. Several brands of gel earseals are compatible with the ANR modules. These include David Clark gel ear seals, AvComm gel ear seals, FlightCom gel-flo ear seals, and Sigtronics gel earseals.
Click here to see our large selection of ear seals.
Compatible Headsets
- Model M-001 is the "standard" module & fits most headsets.
- ADI: Fits models 810.50.
- Aircom: See Flightline.
- Aircraft Spruce: See Skyline.
- ASA: Fits all models (HS-1).
- Avcomm: Fits all. Models AC-900, AC-800, & AC-454 need 5c x-over cable.
- Aviall/Avix: Fits all models.
- David Clark: Fits all the H10-XX series.
- Eastern Avionics: Fits models Mil-2060.
- Falcon: Fits all models.
- Flightcom: Fits models 4DX & 4DLX. This does not fit the Eclipse!
- Flightline: Fits model HS-60-B.
- Gulf/Pacific Coast Avionics: Fits models GCA-4T & GCA-6T.
- Marv Golden: Will fit all except the MG-90.
- Mendelssohn: See Pilot Avionics
- Pilot Avionics: Fits the PA11-XX series headsets and the P-51, PA12.8S, & PA Cadet. Models PA11-90
- RST: Fits all models.
- Sigtronics: Fits models S-8, S-20, S-40, S-45, S-58, S-65, & S-68. Most are wired in series.
- Skyline: Fits the Skycom H-40A & the Skypro H-80A.
- Softcomm: Fits all models. Models C-10 & C-60 need a 5c x-over cable.
In The Box
- Standard modules containing Audio Speaker, ANR speaker, Sensing microphone and control board.
- Assembly parts containing wire, solder, tie wraps, shrink tubing and Aramid pads.
- Gray foam cross for passive noise attenuation
- Power cable 72" long to connect battery box to ANR system
- Crossover cable to replace existing cable on headset
- Standard Battery box to power ANR system. Uses (1) 9 volt transistor battery
- Installation manual
Отзывы ещё не добавлены