TOGGLE SWITCHES AN3021 / MS35058

От 3 870 ₽ до 11 625 ₽

Арт.	MPN	Описание	Цена
AN3021-2	8801K22-IRW	TOGGLE SWITCH MS35058-22	3 870 ₽
AN3027-3	MS-35059-23	TOGGLE SWITCH AN3027-3	11 625 ₽
AN3021-1	8800K16	TOGGLE SWITCHES AN3021 / MS35058	5 250 ₽
AN3027-2	MS35059-22	TOGGLE SWITCH MS35059-22	5 550 ₽
AN3027-1	AN3027-1	TOGGLE SWITCH MS35059-21	10 785 ₽
11-04678	AN3027-4	TOGGLE SWITCH AN3027-4	8 955 ₽
AN3021-3	8810K15	TOGGLE SWITCH AN3021-3	5 250 ₽
AN3027-7	8834K5	TOGGLE SWITCH MS35059-27	8 250 ₽

Описание

Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size. Leading manufacturers of toggle switches are Micro Switch, Alcoswitch, Cutler Hammer, & JBT, now Cutler Hammer. Orders will be filled with switches of the manufacturer whose product is available in local stock.

Note: * Momentary Contact

Features

Toggle Circuit Table

Circuitry with Toggle at

*TOGGLE CIRCUIT CODE ()**
*TOGGLE CIRCUIT CODE ()**	UP	CENTER	DOWN
1	On	Off	On
2	On	None	Off
3	On	None	On
4	On	Off	On*
5	On*	Off	On*
6	Off	None	On*
7	On	Off	None
8	On	Off	None
9	None	Off	On*
10	On	Off*	None
11	On	None	On*
12	On*	On	None
13	On	On	None

* Momentary contact

Documents

toggletech.pdf

Parts per assembly

Dimensions

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What Amp rating is the AN3027-2 switch?

This is a 20 amp switch.

Does the AN3021-2 measure approximately 1-1/8" x 5/8"?

Yes, these are the approximate dimensions: 1-1/8" L x 5/8" W x 5/8" H.

When the chart shows "None" in a given position (e.g. center position), does that mean that the switch does not have that position? In my example, with None in the center position, the switch just moves from On for Up to Off for Down?

Correct. With "None" in the center position, the switch will toggle only all the way up to all the way down.

MS35059-27 is described as momentary on in both on positions, does that mean that the switch lever is spring loaded and stays on as long as it's held in one of the on positions?

Yes, push the lever to either position to activate, and the lever will spring back to center off, if not held in position.

Are these Toggle Switches acceptable for 14V dc system?

Yes, these switched will work in 14v dc systems.

What is the hole size of the SPST toggle switch?

The hole size for the toggle switches to fit through the panel is 1/2".

What does the asterisk mean in ON* for these toggle switches?

The * represents momentary on. Essentially it's on at contact and then once released it is back off. It does not stay on.

On which side of the switch does the mounting hole keyway slot reside? Is it on the up/on side or the down/off side? I am laser cutting mounting holes and want to be sure the panel tooth is aligned properly for the switch slot.

The keyway slot is on the down/off position.

How do I order quantity 12 of MS35059-23 toggle switches?

Enter 12 in the input box in the "Buy" column in the ordering grid. Then, click the "Add to Cart" orange button below and the items will be instantly added to the shopping cart.

Do the switches include hex nut, lock washer and key washer?

Yes, included are 2 hex nuts, 1 lock ring, and 1 lock washer.

What is the weight of this switch, AN3021-1?

The switch weighs approximately 0.06 lbs.

What Amp rating is the AN3021-2 switch?

20 amps.

What means Contact SPDT and DPDT?

SPDT means Single Pull Double Throw. DPDT mean Double Pull Double Throw

Do switches have terminal screws included?

Yes, these switches include screws, washers, and springs for installation.

Should the keyway washer be on the front or backside of the mounting panel?

The Keyway washer is to prevent the switch from spinning. You will need to place the washer behind the panel.

Is the MS35058-22 PMAed for use in certified aircraft?

No, these switches do not have FAA Approval on their own. They are OE on some certified aircraft, so they may be legal for install under the airframe STC. We do not have of aircraft that these can be installed in. Please contact your A&P for information on your aircraft install.